Description
The StorX heating system is a low-limescale and low-maintenance heating station for heating and circulating drinking water in the outdoor climate stable.
The heat transfer to the drinking water takes place indirectly via a storage water on a stainless steel pipe helix.
The heating element, which is otherwise susceptible to limescale, does not come into direct contact with service water, because it only heats the storage water in the storage tank up to max. 60˚ C; the temperature at which limescale begins to dissolve.
Should calcification nevertheless occur on the pipe helix, it will break off again due to the unique heat exchanger design as it contracts or expands due to different service water temperatures. This means that there is no longer any need for complex descaling of the system.
The heat transfer to the drinking water takes place indirectly via a storage water on a stainless steel pipe helix.
The heating element, which is otherwise susceptible to limescale, does not come into direct contact with service water, because it only heats the storage water in the storage tank up to max. 60˚ C; the temperature at which limescale begins to dissolve.
Should calcification nevertheless occur on the pipe helix, it will break off again due to the unique heat exchanger design as it contracts or expands due to different service water temperatures. This means that there is no longer any need for complex descaling of the system.
The StorX has a comprehensible and robust design. The pump is switched on via the main switch and the flow temperature is set via a rotary control, the system then runs automatically.
The bronze pump, specially developed for circulation and hot water circuits, is designed for a ring pipe network of up to 225 m (Therma StorX) and 375 m (Therma StorX Pro) length (0.5 m3/h and 3/4" pipe diameter). For larger pipe diameters, the pipe length can be increased.
Please make sure that the lines are insulated to save energy.
The bronze pump, specially developed for circulation and hot water circuits, is designed for a ring pipe network of up to 225 m (Therma StorX) and 375 m (Therma StorX Pro) length (0.5 m3/h and 3/4" pipe diameter). For larger pipe diameters, the pipe length can be increased.
Please make sure that the lines are insulated to save energy.
Heizsystem StorX
-1
-1
-1
Heizsystem StorX without frost protection
Heizsystem StorX/D with frost protection
Model
Length a
Animal amount
Order number
Technical data
Connection
Ein: G 1 ½", Aus: ¾"
Capacity
3000 oder 4500 Watt
Förderhöhe
6,0 m oder 10 m
Pumpenleistung
max. 96 W (3.0) bzw. 400 W (4.5)
Temperaturregler
0-40°C (Drehregler)
Installation
Wall
Not in stock
Delivery time could last 30 days
Delivery time could last 30 days
0,00
€
excluding VAT
Accessories
Frost protection controller
The JUMO temperature controller is a specific variation with a special housing bottom section for DIN rail or wall mounting. As a result, easy mounting on mounting rails TH35 according to DIN EN 60715 (e.g. in control cabinets) is possible. This variant considerably reduces the mounting time.
For these international innovative surface-mounted thermostats with "Push-In®" terminal technology, the connection wires are only inserted into the terminal point up to the stop - that's it! No tool is required for connecting the wire or strand with a ferrule and the wiring becomes safer. In this manner, the costs and time required for connection are considerably reduced compared to the conventional screw terminal.
Details ❯
For these international innovative surface-mounted thermostats with "Push-In®" terminal technology, the connection wires are only inserted into the terminal point up to the stop - that's it! No tool is required for connecting the wire or strand with a ferrule and the wiring becomes safer. In this manner, the costs and time required for connection are considerably reduced compared to the conventional screw terminal.
×
Heizsystem Therma StorX been successfully added to your cart.